water-based
multi-purpose special effect colours
suitable for paper, cardboard, wood, ceramics, glass, textiles (max. 20% man-made fibres)
ideal for embellishments, lines and ornaments
Instructions for Marabu Metallic Liner and Glitter Liner:

Ensure the painting surface is clean and free from dust. Drying time approx. 6 hours after applying the paint. For textiles (cotton and mixed fabrics with up to 20% man-made fibres), any finishes and fabric conditioners have to be washed out. Lightly press the liner into the fabric. After drying, iron through a thin cloth for 3 minutes at cotton setting. Large-area designs have to be ironed for 3 minutes on each 30 x 30 cm section. Also suitable for oven fixing (8 minutes/150�C). Check heat resistance of the painting surface first! Afterwards washable up to 40�C. Wash and iron inside out.

Instructions for Marabu 3D Liner:

Ensure the painting surface is clean and free from dust. Drying time at least 6 hours, depending on application. Puff up the paint with a strong hair dryer (at highest setting) or in a pre-heated oven at 150�C. Duration between 2-15 minutes, depending on application, until it appears matt and raised. Check heat resistance of the painting surface first!

For textiles (cotton and mixed fabrics with up to 20 % man-made fibres), any finishes and fabric conditioners have to be washed out. Lightly press the liner into the fabric. After drying (at least 6 hours), iron each painted section from the reverse at cotton setting on a soft surface without pressure for 2 to 3 minutes until the paint puffs up matt and raised. Also suitable for oven fixing (see above). Afterwards washable up to 40�C. Wash and iron inside out.

When iron fixing, the 3D Liner can only be applied and puffed up after fixing the other paints and liners.